Research Progress on the Application of Covalent Organic Framework Nanozymes in Analytical Chemistry.

Covalent organic frameworks (COFs) are porous crystals that have high designability and great potential in designing, encapsulating, and immobilizing nanozymes. COF nanozymes have also attracted extensive attention in analyte sensing and detection because of their abundant active sites, high enzyme-carrying capacity, and significantly improved stability. In this paper, we classify COF nanozymes into three types and review their characteristics and advantages. Then, the synthesis methods of these COF nanozymes are introduced, and their performances are compared in a list. Finally, the applications of COF nanozymes in environmental analysis, food analysis, medicine analysis, disease diagnosis, and treatment are reviewed. Furthermore, we also discuss the application prospects of COF nanozymes and the challenges they face.

Recent Progress on Microfluidics Integrated with Fiber-Optic Sensors for On-Site Detection.

This review introduces a micro-integrated device of microfluidics and fiber-optic sensors for on-site detection, which can detect certain or several specific components or their amounts in different samples within a relatively short time. Fiber-optics with micron core diameters can be easily coated and functionalized, thus allowing sensors to be integrated with microfluidics to separate, enrich, and measure samples in a micro-device. Compared to traditional laboratory equipment, this integrated device exhibits natural advantages in size, speed, cost, portability, and operability, making it more suitable for on-site detection. In this review, the various optical detection methods used in this integrated device are introduced, including Raman, ultraviolet-visible, fluorescence, and surface plasmon resonance detections. It also provides a detailed overview of the on-site detection applications of this integrated device for biological analysis, food safety, and environmental monitoring. Lastly, this review addresses the prospects for the future development of microfluidics integrated with fiber-optic sensors.

Room-temperature fabrication of fluorinated covalent organic polymer @ Attapulgite composite for in-syringe membrane solid-phase extraction and analysis of domoic acid in aquatic products.

A novel fluorinated covalent organic polymer @ attapulgite composite (F-COP@ATP) was prepared at room temperature for in-syringe membrane solid-phase extraction (SM-SPE) of domoic acid (DA) in aquatic products. Natural ore ATP has the advantages of low cost, good mechanical strength and abundant hydroxyl group on its surface, and in-situ modified F-COP layer can provide abundant adsorption sites. F-COP@ATP combining the advantages of F-COP and ATP, becomes an ideal adsorbent for DA extracting. Moreover, a high-throughput sample preparation strategy was carried out by using the F-COP@ATP membrane as syringe filter and assembling syringes with a ten-channel injection pump. In addition, the experimental factors were optimized, such as pH of extract, amount of adsorbent, velocity of extraction and desorption, type and volume of desorption solvent. The DA analytical method was established by SM-SPE-HPLC/tandem mass spectrometry. The method had a wide linear range with low limit of detection (0.344 ng/kg) and low limit of quantification (1.14 ng/kg). F-COP@ATP membrane can be reused more than five times. The method realized the analysis of DA in scallop and razor clam samples, which shows its application prospect in practical analysis. This study provided an efficient, low-energy and mild idea for preparing other reusable natural mineral ATP-based composite materials for separation and enrichment, which reduces the experimental cost and is closer to environmental protection and green chemistry to a certain extent.

Preparation of MIL-101(Cr)-NH2@TAPB-DVA-COF based membrane solid-phase extraction for efficient enrichment and sensitive determination of trace aromatic disinfection by-products in juice drinks.

Aromatic disinfection by-products (DBPs) have garnered considerable interest in recent years for their potential carcinogenicity. However, efficient separation and enrichment of DBPs in complex samples is a challenge due to the extremely low content of aromatic DBPs and the complexity of sample matrices. In this study, a MIL-101(Cr)-NH2@TAPB-DVA-COF hybrid material was prepared as the enrichment medium of membrane solid-phase extraction (M-SPE) to efficiently determine trace emerging aromatic DBPs. This medium exhibited excellent enrichment capacity and selectivity for aromatic DBPs because of the strong hydrogen bonding, π-π stacking and hydrophobic interactions. An efficient analytical method for five aromatic DBPs in juice drinks was successfully established by use of this hybrid material as the enrichment medium for M-SPE in combination with liquid chromatography tandem mass spectrometry (LC-MS/MS). The limits of detection of the established method were from 0.50 to 3.00 ng/L. Moreover, the method had been successfully used in real juice drinks to determine trace five aromatic DBPs with the spiked recoveries ranging from 84.1% to 125%. The method possessed high analytical sensitivity and accuracy for these five aromatic DBPs in juice drinks with the aid of the efficient M-SPE technology proposed.

A Portable Array Visualization Device Integrating Sample Preparation and Detection All-in-One for the On-Site Analysis of Complex Samples.

A gas membrane separation/array fluorescence visualization (GMS/AFV) device is developed by integrating hydrazine-based carbonized copolymer dots (PD-N2H4) for visual on-site analysis. The novel PD-N2H4 was synthesized using a "polymer template" approach, exhibiting strong blue fluorescence capable of visual sensing. The GMS/AFV device integrates sample preparation and detection all-in-one, consisting of a smartphone, a sample pretreatment system, and an optical system. In the detection procedure, the samples will be treated in the sample pretreatment system to create volatile gases. Therefore, any gas samples as well as solid and liquid samples that potentially produce volatile gases can be visually detected on-site by the device. H2S was utilized as a model analyte to test the practicality of the GMS/AFV device. The entire analysis can be finished in 3 min, and the limit of detection of H2S is as low as 3.4 µg/L. Surprisingly, the device is also capable of high-throughput sample detection, which can process 48 samples simultaneously in about 20 min. The device offers a quick, easy, cheap, and environmentally friendly way to analyze volatile gases, and it creates new opportunities for on-site detection of complex samples.

Recent advance on microextraction sampling technologies for bioanalysis.

The contents of target substances in biological samples are usually at low concentration levels, and the matrix of biological samples is usually complex. Sample preparation is considered a very critical step in bioanalysis. At present, the utilization of microextraction sampling technology has gained considerable prevalence in the realm of biological analysis. The key developments in this field focus on the efficient microextraction media and the miniaturization and automation of adaptable sample preparation methods currently. In this review, the recent progress on the microextraction sampling technologies for bioanalysis has been introduced from point of view of the preparation of microextraction media and the microextraction sampling strategies. The advance on the microextraction media was reviewed in detail, mainly including the aptamer-functionalized materials, molecularly imprinted polymers, carbon-based materials, metal-organic frameworks, covalent organic frameworks, etc. The advance on the microextraction sampling technologies was summarized mainly based on in-vivo sampling, in-vitro sampling and microdialysis technologies. Moreover, the current challenges and perspective on the future trends of microextraction sampling technologies for bioanalysis were briefly discussed.

Flexible microfluidic co-recognition coupled with magnetic enrichment and silent SERS sensing for simultaneous analysis of bacteria in food.

Food safety represents a critical global public health issue, with safety challenges posed by foodborne pathogens garnering extensive attention. Therefore, we introduce a co-recognition, enrichment and sensing (CES) all-in-one strategy for analysis of bacteria with low background and high specificity. This method employs antimicrobial peptide (AMP) functionalized magnetic nanoparticles (MNPs) to enrich bacteria and uses aptamer@Au@PBA (KxMFe(CN)6 (M = Pb and Ni)) NPs as silent SERS tags. When both S. aureus and E. coli O157:H7 are present, the silent SERS probes could specifically label the target bacteria, forming a sandwich-like structure. This binding induces silent Raman shifts (2139 cm-1 and 2197 cm-1), enabling quantification of two bacteria. Coupling with the modular flexible microfluidics and magnetic control slider device, this platform facilitates rapid switching between magnetic loading and elution. The CES SERS method demonstrated linear relationships for both S. aureus and E. coli O157:H7 at 50-1600 cfu mL-1, with detection limits of 14 and 18 cfu mL-1, respectively. The method achieved recovery rates of 85.6-112% and relative standard deviations of 1.5-8.6%. Validation using the ELISA method revealed relative errors between -7.5 and 4.3%. The CES approach has potential applications in food safety, environmental monitoring, and biomedical diagnosis.

Liquid-Phase Cyclic Chemiluminescence for the Identification of Cobalt Speciation.

Accurate discrimination of metal species is a significant analytical challenge. Herein, we propose a novel methodology based on liquid-phase cyclic chemiluminescence (CCL) for the identification of cobalt speciation. The CCL multistage signals (In) of the luminol-H2O2 reaction catalyzed by different cobalt species have different decay coefficients k. Thereby, we can facilely identify various cobalt species according to the distinguishable k values, including the complicated and structurally similar cobalt complexes, such as analogues of [Co(NH3)5X]n+ (X = Cl-, H2O, and NH3), Co(II) porphyrins, and bis(2,4-pentanedione) cobalt(II) derivatives. Especially, the number of substituent atoms also influences the k value greatly, which allows excellent discrimination between complexes that only have a subtle difference in the substituent group. In addition, linear discriminant analysis based on In provides a complementary solution to improve the differentiating ability. We performed density functional theory calculations to investigate the interaction mode of H2O2 over cobalt species. A close negative correlation between the adsorption energy and the k value is observed. Moreover, the calculation of energy evolutions of H2O2 decomposition into a double hydroxide radical shows that a high level of consistency exists between the activation energy barrier and the k value. The results further demonstrate that the decay coefficient of the CCL multistage signal is associated with the catalytic reactivity of the cobalt species. Our work not only broadens the application of chemiluminescence but also provides a complementary technology for speciation analysis.

Bifunctional Mo2N Nanoparticles with Nanozyme and SERS Activity: A Versatile Platform for Sensitive Detection of Biomarkers in Serum Samples.

The combined application of nanozymes and surface-enhanced Raman scattering (SERS) provides a promising approach to obtain label-free detection. However, developing nanomaterials with both highly efficient enzyme-like activity and excellent SERS sensitivity remains a huge challenge. Herein, we proposed one-step synthesis of Mo2N nanoparticles (NPs) as a "two-in-one" substrate, which exhibits both excellent peroxidase (POD)-like activity and high SERS activity. Its mimetic POD activity can catalyze the 3,3',5,5'-tetramethylbenzidine (TMB) molecule to SERS-active oxidized TMB (ox-TMB) with high efficiency. Furthermore, combining experimental profiling with theory, the mechanism of POD-like activity and SERS enhancement of Mo2N NPs was explored in depth. Benefiting from the outstanding properties of Mo2N NPs, a versatile platform for indirect SERS detection of biomarkers was developed based on the Mo2N NPs-catalyzed product ox-TMB, which acts as the SERS signal readout. The feasibility of this platform was validated using glutathione (GSH) and target antigens alpha-fetoprotein antigen (AFP) and carcinoembryonic antigen (CEA) as representatives of small molecules with a hydroxyl radical (·OH) scavenging effect and proteins with a low Raman scattering cross-section, respectively. The limits of detection of GSH, AFP, and CEA were as low as 0.1 µmol/L, 89.1, and 74.6 pg/mL, respectively. Significantly, it also showed application in human serum samples with recoveries ranging from 96.0 to 101%. The acquired values based on this platform were compared with the standard electrochemiluminescence method, and the relative error was less than ±7.3. This work not only provides a strategy for developing highly active bifunctional nanomaterials but also manifests their widespread application for multiple biomarkers analysis.

Synergetic Multichiral Covalent Organic Framework for Enantioselective Recognition and Separation.

In enantiomer recognition and separation, a highly enantioselective approach with universal applicability is urgently desired but hard to realize, especially in the case of chiral molecules. To resolve the trade-off between enantioselectivity and universality, a glutathione (GSH) and methylated cyclodextrins (MCD)-functionalized covalent organic framework (GSH-MCD COF) with porosity and abundant chiral surfaces is presented that was designed and synthesized for recognition and separation of various enantiomers. As expected, the GSH-MCD COF can be used as chiral stationary phases for the separation of various enantiomers, including aromatic alcohols, aromatic acids, amides, amino acids, and organic acids, with performance and versatility even superior to some widely used commercial chiral chromatographic columns. Furthermore, the synthesized GSH-MCD COF shows high enantioselectivity for the rapid recognition and identification of enantiomers and chiral metabolites when coupling to Raman spectroscopy. Molecular simulations suggest that the COF provides a confined microenvironment for cyclodextrins and peptides that dictates the separation and recognition capability. This work provides a strategy to synthesize synergetic multichiral COF and achieve separations and recognitions of enantiomers in complex samples.

Experimental study of a novel mouse model of tibial shaft fracture combined with blunt chest trauma.

BACKGROUD: Thoracic Trauma and Limb Fractures Are the Two most Common Injuries in Multiple Trauma. However, there Is Still a Lack of Mouse Models of Trauma Combining Tibial Shaft Fracture (TSF) and Thoracic Trauma. In this Study, we Attempted to Develop a Novel Mouse Model of TSF Combined with Blunt Chest Trauma (BCT). METHODS: A total of 84 C57BL/6J male mice were used as the multiple trauma model. BCT was induced by hitting the chests of mice with heavy objects, and TSF was induced by hitting the tibia of mice with heavy objects after intramedullary fixation. Serum specimens of mice were received by cardiac puncture at defined time points of 0, 6, 12, 24, 48, and 72 h. RESULTS: Body weight and body temperature tended to decrease within 24 h after multiple trauma. Hemoglobin analyses revealed a decrease during the first 24 h after multiple trauma. Some animals died by cardiac puncture immediately after chest trauma. These animals exhibited the most severe pulmonary contusion and hemorrhage. The level of lung damage varied in diverse mice but was apparent in all animals. Classic hematoxylin and eosin (H&E)-stained paraffin pulmonary sections of mice with multiple trauma displayed hemorrhage and an immunoinflammatory reaction. Bronchoalveolar lavage fluid (BALF) and serum samples of mice with multiple trauma showed an upregulation of interleukin-1ß (IL-1ß), IL-6, and tumor necrosis factor-1α (TNF-1α) compared with the control group. Microimaging confirmed the presence of a tibia fracture and pulmonary contusion. CONCLUSIONS: The novel mouse multiple trauma model established in this study is a common trauma model that shows similar pathological mechanisms and imaging characteristics in patients with multiple injuries. This study is useful for determining whether blockade or intervention of the cytokine response is beneficial for the treatment of patients with multiple trauma. Further research is needed in the future.

Silver nanoparticles modified sulfur-containing POSS polymer membrane substrate for adsorption and surface-enhanced Raman scattering analysis of chrysoidine in food samples.

In analysis of complex samples, the stability and sensitivity of surface-enhanced Raman scattering (SERS) substrates may be compromised by matrix interference. To address this issue, a membrane substrate was prepared for fast enrichment, separation, and detection of chrysoidine all-in-one. The silver nanoparticles modified sulfur-containing POSS polymer (AgNPs/POSS-P-S) SERS membrane substrate was fabricated using polyhedral oligomeric silsesquioxane (POSS) as support materials. Through in-situ growth, AgNPs were uniformly modified on POSS-P-S to ensure the stability and SERS activity of the membrane substrate. The enhancement factor of the malachite green was up to 5.3 × 105. By loading the AgNPs/POSS-P-S on membrane, on the other hand, the SERS membrane substrate can also serve as an adsorption medium for separating chrysoidine from sample matrix. Furthermore, the specific sensing mechanism of AgNPs/POSS-P-S for chrysoidine was investigated and a fast, sensitive, and selective method for its quantification was established, with a linear range of 0.010-2.0 mg/L and the limits of detection at 3.7 µg/L. In addition, the SERS method was successfully applied for the analysis of chrysoidine in beverages and chili products with the recoveries in the range of 83.5%-113.4 % and the relative standard deviations in 3.2%-9.0 %. The proposed AgNPs/POSS-P-S membrane based SRES method has great potential for rapid chrysoidine analysis in food samples.

All-in-one strategy to construct bifunctional covalent triazine-based frameworks for simultaneous extraction of per- and polyfluoroalkyl substances and polychlorinated naphthalenes in foods.

Per- and polyfluoroalkyl substances (PFASs) and polychlorinated naphthalenes (PCNs) are of growing concern due to their toxic effects on the environment and human health. There is an urgent need for strategies to monitor and analyze the coexistence of PFASs and PCNs, especially in food samples at trace levels, to ensure food safety. Herein, a novel ß-cyclodextrin (ß-CD) derived fluoro-functionalized covalent triazine-based frameworks named CD-F-CTF was firstly synthesized. This innovative framework effectively combines the porous nature of the covalent organic framework and the host-guest recognition property of ß-CD enabling the simultaneous extraction of PFASs and PCNs. Under the optimal conditions, a simple and rapid method was developed to analyze PFASs and PCNs by solid-phase extraction (SPE) based simultaneous extraction and stepwise elution (SESE) strategy for the first time. When coupled with liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) and gas chromatography-tandem mass spectrometry (GC-MS/MS), this method achieved impressive detection limits for PFASs (0.020 -0.023 ng/g) and PCNs (0.016 -0.075 ng/g). Furthermore, the excellent performance was validated in food samples with recoveries of 76.7-107 % (for PFASs) and 78.0-108 % (for PCNs). This work not only provides a simple and rapid technique for simultaneous monitoring of PFASs and PCNs in food and environmental samples, but also introduces a new idea for the designing novel adsorbents with multiple recognition sites.

Flower-like calix[6]arene-based covalent organic framework for membrane extraction of sulfonamides in animal-derived food through host-guest interaction prior to determination with ultra-high performance liquid chromatography-tandem mass spectrometry.

Supramolecular macrocycle-based covalent organic frameworks (COFs) are promising adsorbents for adsorption of hazards due to their host-guest recognition property. However, most supramolecular macrocycles are conformationally flexible, making them challenging to introduce into COFs. In this work, a calix[6]arene-based COF (CX6-BD COF) was fabricated with a unique flower-like morphology and high crystallinity. Especially, the cavity of CX6 exhibited host-guest inclusion interaction for sulfonamides (SAs), which was verified by quantum chemistry calculation. The integration of the porosity of COFs with the recognition cavity of CX6 made CX6-BD COF display excellent enrichment performance for SAs, with good enrichment factors (EFs) between 77 and 96. The material was employed as an adsorbent for COF membrane filter extraction, coupled with ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) to simultaneously enrich and determine seven SAs in animal-derived food. The analytical method showed a wide linear range (0.01-100 µg/L and 0.05-100 µg/L) and low detection limits (3-10 ng/L). The established method was successfully applied to sensitively determine SAs in chicken, pork and beef samples, which achieved satisfactory recoveries (73.8-113%). These results demonstrated CX6-BD COF has good application potential in determination of trace and ultra-trace SAs in complex food matrices as an adsorbent.

Enrichment-Sensing All-in-One Strategy Integrated in the La(OH)3-Au@AgNPs Substrate for Rapid Surface-Enhanced Raman Spectroscopy Analysis of Purine Components.

Improving the speediness of complex sample analysis has attracted much research interest in analytical science. In this work, an enrichment-sensing all-in-one strategy was presented for rapid surface-enhanced Raman spectroscopy (SERS) analysis of purine components by using the La(OH)3-Au@AgNPs nanocomposite. Two-dimensional (2D) La(OH)3 nanosheets with nanothickness and accessible active sites not only acted as efficient media for the rapid enrichment of analytes but also provided flat planes for the intensive decoration of Au@AgNPs nanoparticles to amplify the SERS signals of adsorbed analytes. The nanocomposite could realize the rapid enrichment-sensing of purine components in 1 min, including mercaptopurine, thioguanine, adenine, and purine. Subsequently, the surface adsorption behaviors were explored by density functional theory and the enhancement mechanisms were simulated by the finite-difference time-domain method. Moreover, the nanocomposite also exhibited good SERS performances with relative standard deviations (RSDs) of uniformity less than 6.5% (n = 23), RSDs of batch-to-batch stability less than 7.3% (n = 9), and long-term stability over 9 weeks with RSDs within 6.6%. Finally, the enrichment-sensing strategy was applied for the rapid SERS analysis of two projects: mercaptopurine in tablets and adenine in beers with detection limits of 6.0 and 0.76 µg/L and spiked recoveries of 90.9-100 and 84.2-101%, respectively. Benefiting from the high-performance enrichment medium and closely packed plasmonic nanoparticles, the enrichment-sensing all-in-one strategy possesses great potential for rapid on-site detection in food safety and pharmaceutical analysis.

Chemical-Chemical Redox Cycle Signal Amplification Strategy Combined with Dual Ratiometric Immunoassay for Surface-Enhanced Raman Spectroscopic Detection of Cardiac Troponin I.

Improving the sensitivity and reproducibility of surface-enhanced Raman spectroscopy (SERS) methods for the detection of bioactive molecules is crucial in biological process research and clinical diagnosis. Herein, we designed a novel SERS platform for cardiac troponin I (cTnI) detection by a chemical-chemical redox cycle signal amplification strategy combined with a dual ratiometric immunoassay. First, ascorbic acid (AA) was generated by enzyme-assisted immunoreaction with a cTnI-anchored sandwich structure. Then, oxidized 4-mercaptophenol (ox4-MP) was reacted with AA to produce 4-mercaptophenol (4-MP). Quantitative analysis of cTnI was realized by a Raman signal switch between ox4-MP and 4-MP. Specifically, AA could be regenerated by reductant (tris(2-carboxyethyl) phosphine, TCEP), which in turn produced more signal indicator 4-MP, causing significant signal amplification for cTnI analysis by SERS immunosensing. Moreover, a dual ratiometric-type SERS method was established with the intensity ratio I1077/I822 and I633/I822, which improved the reproducibility of the cTnI assay. The excellent performance of the chemical-chemical redox cycle strategy and ratio-type SERS assay endows the method with high sensitivity and reproducibility. The linear ranges of cTnI were 0.001 to 50.0 ng mL-1 with detection limits of 0.33 pg mL-1 (upon I1077/I822) and 0.31 pg mL-1 (upon I635/I822), respectively. The amount of cTnI in human serum samples yielded recoveries from 89.0 to 114%. This SERS method has remarkable analytical performance, providing an effective approach for the early diagnosis of cardiovascular diseases, and has great latent capacity in the sensitive detection of bioactive molecules.

Thermosensitive poly(N-isopropylacrylamide) hydrogel/highly internal phase emulsion porous polymer tube tip solid-phase extraction for the determination of methylimidazoles in beverage.

Poly(N-isopropylacrylamide) thermosensitive hydrogel tube tip solid-phase extraction/ultra-high liquid chromatography-mass spectrometry (UPLC-MS/MS) method was developed for analysis of methylimidazoles in beverages. Thermosensitive poly(N-isopropylacrylamide) (PNIPA) hydrogel solid-phase extraction (SPE) medium was prepared on the surface of highly internal phase emulsion (HIPE) porous polymer by thermally initiated polymerization in a tube tip. The temperature sensitive SPE medium has the characteristics of high porosity and high specific surface area. When the temperature is higher than 30.0℃, it can well adsorb polar molecular, and could quickly desorb polar molecular when the temperature was less than 20.0℃. The tube tip SPE coupled with UPLC-MS/MS method was established for the determination of three polar molecules including 1-methylimidazole, 4-methylimidazole and 2-methylimidazole, with linear ranges of 2.50 - 240 µg/L, and detection limits of 1.20, 1.20 and 0.65 µg/L, respectively. The method was applied to the determination of three methylimidazoles in beverages with the spiked recoveries of 81.5%-115.5% and the RSD of 0.6%-5.0%, and the relative errors of the results with the national standard UPLC-MS/MS method were in the range of -8.5%-8.9%.

[Surface-modified microchip electrophoretic separation and analysis of functional components in health care products].

Microchip electrophoresis (MCE) is widely applied in food, environment, medicine, and other fields, owing to its high separation efficiency, low consumption of reagents and samples, and ease of integrating multiple operating units. Polymer microchip materials like cycloolefin copolymer (COC) are low-cost and easy to fabricate. However, their practical applications are limited by the non-specific adsorption on channel surface during electrophoresis and the instability of electroosmotic flow. These shortcomings can be solved by COC surface modification. In this study, a static coating and dynamic/static coating combined strategy was used to develop a channel-surface-modified COC microchip. Combined with laser-induced fluorescence (LIF) detection, a MCE-LIF separation and analysis method was developed for detecting functional components in health care products. The separation performance of MCE was improved by the static coating microchannel surface modification method. The static coating was constructed by hydrophobic amino acid adsorption, glutaraldehyde immobilization, and hydrophilic amino acid functionalization on the COC microchannel surface. The separation performance of MCE was improved by microchannel surface modification combined with dynamic/static coating. The static coating was constructed by valine adsorption, carboxyl activation, and ethylenediamine functionalization on the COC microchannel surface. The dynamic coating is automatically formed by introducing a buffer solution containing hydroxypropyl methylcellulose and sodium dodecyl sulfate into the microchannel. The physical and chemical properties of surface-modified microchannels and the factors governing electrophoretic separation were studied. Combined with LIF detection, the MCE-LIF separation and analysis of lysine and γ-aminobutyric acid present in children's health care products, as well as aspartic acid and taurine in sport drinks, were developed. The recoveries of lysine and γ-aminobutyric acid in children's health care products were 84.8%-118%, and the relative standard deviations (RSDs) were less than 7.2% (n=3). The recoveries of aspartic acid and taurine in sport drinks were 97.5%-118%, and the RSDs were less than 6.4% (n=3). The analysis results are consistent with the HPLC results, and the method has potential for application in the separation and analysis of anionic amino acids in health care products.

Chemometrics-based Discrimination of Virgin and Recycled Acrylonitrile-Butadiene-Styrene Plastics Toys via Non-targeted Screening of Volatile Substances.

Owing to the growing emphasis on child safety, it is greatly urgent to identify and assess the unknown compounds and discriminate the recycled materials for plastic toys. In this study, gas chromatography mass spectrometry coupled with static headspace has been optimized by response surface methodology for non-targeted screening of unknown volatiles in acrylonitrile-butadiene-styrene (ABS) plastic toys. Optimum conditions for static headspace were 120 °C for extraction temperature and 48 min for extraction time. A total of 83 volatiles in 11 categories were qualitatively identified by matching the NIST database library, retention index and standard materials. Considering high positive rate and potential toxicity, high-risk volatiles in ABS plastic toys were listed and traced for safety pre-warning. Moreover, the differential volatiles between virgin and recycled ABS plastics were screened out by orthogonal partial least-squares discrimination analysis. Principal component analysis, hierarchical cluster analysis and linear discrimination analysis were employed to successfully discriminate recycled ABS plastic toys based on the differential volatiles. The proposed strategy represents an effective and promising analytical method for non-targeted screening and risk assessment of unknown volatiles and discrimination of recycled materials combining with various chemometric techniques for children's plastic products to safeguard children's health.

[Advances in microchip electrophoresis for the separation and analysis of biological samples].

Microchip electrophoresis is a separation technology that involves fluid manipulation in a microchip; the advantages of this technique include high separation efficiency, low sample consumption, and fast and easy multistep integration. Microchip electrophoresis has been widely used to rapidly separate and analyze complex samples in biology and medicine. In this paper, we review the research progress on microchip electrophoresis, explore the fabrication and separation modes of microchip materials, and discuss their applications in the detection and analysis of biological samples. Research on microchip materials can be mainly categorized into chip materials, channel modifications, electrode materials, and electrode integration methods. Microchip materials research involves the development of silicon, glass, polydimethylsiloxane and polymethyl methacrylate-based, and paper electrophoretic materials. Microchannel modification research primarily focuses on the dynamic and static modification methods of microchannels. Although chip materials and fabrication technologies have improved over the years, problems such as high manufacturing costs, long processing time, and short service lives continue to persist. These problems hinder the industrialization of microchip electrophoresis. At present, few static methods for the surface modification of polymer channels are available, and most of them involve a combination of physical adsorption and polymers. Therefore, developing efficient surface modification methods for polymer channels remains a necessary undertaking. In addition, both dynamic and static modifications require the introduction of other chemicals, which may not be conducive to the expansion of subsequent experiments. The materials commonly used in the development of electrodes and processing methods for electrode-microchip integration include gold, platinum, and silver. Microchip electrophoresis can be divided into two modes according to the uniformity of the electric field: uniform and non-uniform. The uniform electric field electrophoresis mode mainly involves micro free-flow electrophoresis and micro zone electrophoresis, including micro isoelectric focusing electrophoresis, micro isovelocity electrophoresis, and micro density gradient electrophoresis. The non-uniform electric field electrophoresis mode involves micro dielectric electrophoresis. Microchip electrophoresis is typically used in conjunction with conventional laboratory methods, such as optical, electrochemical, and mass spectrometry, to achieve the rapid and efficient separation and analysis of complex samples. However, the labeling required for most widely used laser-induced fluorescence technologies often involves a cumbersome organic synthesis process, and not all samples can be labeled, which limits the application scenarios of laser-induced fluorescence. The applications of unlabeled microchip electrophoresis-chemiluminescence/dielectrophoresis are also limited, and simplification of the experimental process to achieve simple and rapid microchip electrophoresis remains challenging. Several new models and strategies for high throughput in situ detection based on these detection methods have been developed for microchip electrophoretic systems. However, high throughput analysis by microchip electrophoresis is often dependent on complex chip structures and relatively complicated detection methods; thus, simple high throughput analytical technologies must be further explored. This paper also reviews the progress on microchip electrophoresis for the separation and analysis of complex biological samples, such as biomacromolecules, biological small molecules, and bioparticles, and forecasts the development trend of microchip electrophoresis in the separation and analysis of biomolecules. Over 250 research papers on this field are published annually, and it is gradually becoming a research focus. Most previous research has focused on biomacromolecules, including proteins and nucleic acids; biological small molecules, including amino acids, metabolites, and ions; and bioparticles, including cells and pathogens. However, several problems remain unsolved in the field of microchip electrophoresis. Overall, microchip electrophoresis requires further study to increase its suitability for the separation and analysis of complex biological samples.